Elastomeric Coating Application in Syracuse, NY

Elastomeric Coating Application in Syracuse

Elastomeric coating application is a specialized exterior finish designed to bridge and seal cracks in masonry, stucco, and concrete surfaces common in Syracuse’s older commercial and residential buildings. Unlike standard paint, which simply adds color and limited protection, elastomeric coatings form a thick, rubber-like membrane that expands and contracts with temperature changes. This is critical for Syracuse properties, where freeze-thaw cycles can exceed 40 swings per winter, causing conventional paint to peel and substrates to spall. The process begins with a thorough surface preparation: power washing to remove dirt and efflorescence, followed by scraping loose material and filling cracks wider than 1/16 inch with a flexible caulk. Then, the coating is applied in two coats using a heavy-nap roller or airless sprayer, with careful attention to corners and joints. Each coat must cure fully—typically 24 to 48 hours depending on humidity—before the next goes on. The result is a seamless, waterproof barrier that can stretch up to 300% without cracking, making it ideal for Syracuse’s historic brickwork and modern masonry facades alike.

For Syracuse property owners, elastomeric coating is more than a cosmetic upgrade. The coating’s breathability allows trapped moisture to escape while blocking liquid water from penetrating, which prevents the spalling and freeze damage that plague local buildings. It also provides a UV-resistant finish that reduces heat absorption in summer, lowering cooling costs. However, it is not a one-size-fits-all solution. The coating must be applied only to sound surfaces—not over loose paint or crumbling mortar—and requires a minimum temperature of 40 degrees Fahrenheit during application and curing. This makes late spring through early fall the optimal window in Syracuse. Properly applied, an elastomeric coating can extend the life of a building’s exterior by 10 to 15 years, delaying costly repointing or full replacement of masonry.

Areas We Cover in Syracuse

Exterior Painting Syracuse provides elastomeric coating application across the city and surrounding communities. We serve properties in Armory Square, Brighton, DeWitt Acres, DeWittshire, Downtown, and Eastwood, as well as near landmarks such as 601 Tully, the Great New York State Fairgrounds, Jamesville Community Museum, and the Onondaga Historical Association Museum & Research Center. Whether your building is a mixed-use storefront in Armory Square or a single-family home in Brighton, we tailor the coating system to your specific substrate and exposure conditions.

What to Expect

When you schedule an elastomeric coating application with us, here is what the process looks like:

• A site visit to assess surface condition, measure moisture levels, and identify any cracks or delaminated areas.
• Detailed surface preparation, including pressure washing, scraping, and caulking of cracks wider than 1/16 inch.
• Application of a primer if recommended for your substrate (e.g., dense concrete or glazed brick).
• Two coats of 100% acrylic elastomeric coating, applied at a minimum thickness of 15 mils wet film.
• A final inspection to ensure even coverage, no pinholes, and proper curing before scaffolding removal.

We work around your schedule to minimize disruption, and we clean up all debris and equipment daily.

Ready to Protect Your Syracuse Property?

Contact Exterior Painting Syracuse today to schedule a free estimate for elastomeric coating application. Call us at (315) 555-0123 or fill out the form on our website. We will help you choose the right coating for your building’s needs and provide a detailed timeline for your project.